Porsche > 911 > 2011
Tire Sizes 2011 Porsche 911

Wheel Specs

Lug Nut Size - M14 x 1.5

Buy Lug Nuts on amazon. When measuring your lug nut sizes, you'll need to pay attention to two separate numbers. The first number indicates the diameter of the stud, and for metric-sized nuts this is measured in millimeters between threads.

Standard lug nuts are denoted by a second number which expresses thread pitch in terms of how many threads per inch there are on that particular nut or bolt. As an example, a 12mmx1.25 sized lug nut will have both 12mm diameter as well as 1.25 mm thread pitch!

Lug Nuts

Shop for Lugnuts at Amazon


Bolt Pattern - 5x130

The bolt pattern (PCD) is essential for wheel fitment because it determines the compatibility of the aftermarket rims with the car's hub.

The number of lug holes on the wheel should match the number of studs on the hub, and the distance between the holes should be identical. Change your vehicle's bolt pattern by installing wheel adapters to match the lug scheme of the wheels that are to be installed.

Shop for Wheel Adapters at Amazon




Hub Bore Size - 71.5 mm

Find cool-looking Center Caps on Amazon. What is the center bore of a car wheel? The hole at its middle that meets with a hub. A new set of rims must have exactly the same dimension to fit properly on your vehicle. Otherwise, you may soon lose your wheels while turning corners!

Center Caps

Wheel Center Bore:



Shop for Hub Center Rings at Amazon


Are 2011 Porsche 911 wheels interchangeable?

Are you currently intending to swap wheels or your personal 2011 Porsche 911 shortly but not confident whether lug rims interchangeable with any other car? Therefore probably you know that this issue is also a little problematic. Moreover, if you have a little tire swapping , then you understand that searching new wheels is just not prompt and smooth. Unless performed through the cooperation with a specialist. Thus the good thing is that our specialists support you with this mission.

We will explain that the amount of lug nuts carries weight though visually, the new-fangled wheel's bolt scheme would seem to go with your 2011 Porsche 911 pattern. Moreover, you need to concentrate on the wheel countervail, the gap from your tire surface to its center, and memorize that this measurement could be under zero, above zero, and zero. In the process of preparing the chart, our team have composed all the things we bear in mind about plus-sizing: how this method could advance your 2011 Porsche 911 image and productivity, what profits and faults are, and what inch-up approaches one may find.

On the whole, our large database would present the cross reference facts according to the bolt pattern and wheel designations. Below you may track down the cross reference details with a record of autos qualified to receive wheel interchange with 2011 Porsche 911.

TIP

If an incorrect bolt is used, a wheel may fall off, someone may be killed or injured and you and/or your company could be sued. All this because someone didn't take a few extra minutes to choose the correct bolt for a specific application.

Porsche 911 of another year

Select the year